Propagation of premixed hydrogen-air flame initiated by a planar ignition in a closed tube

Abstract

Numerical simulations were used to study the dynamics of premixed flames propagating after planar ignition in a closed tube filled with stoichiometric hydrogen-air mixture. The two-dimensional fully compressible reactive Navier–Stokes equations coupled to a calibrated chemical-diffusive model were solved using a high-order numerical method and adaptive mesh refinement. The results show that the flame evolves from an initially planar flame to a double-cusped tulip flame, subsequently to a multi-cusped tulip flame, and finally to a series of distorted tulip flames (DTFs). The DTF forms one after another until the end of combustion. The initial flame lips of the double-cusped tulip flame are produced due to the stretching effect of nonuniform flow caused by the wall friction. The multi-cusped tulip flame forms as secondary cusps are created on the leading flame tips near the sidewalls. The formation of DTFs here is thought to be closely connected to pressure waves generated in the flame propagation process. The first DTF is caused by the combined effects of the vortex motions and the Rayleigh–Taylor (RT) instability driven by pressure waves, while the subsequent DTFs form due to reverse flows and RT instability. Nevertheless, both the vortex motions and reverse flows are essentially induced by the interactions between pressure waves and flow fields. Furthermore, the numerical results were compared to that in the case with a semicircular ignition. It was found that although there are significant differences in the early flame acceleration and tulip formation stages between the two differently shaped ignitions, the dynamics of DTFs are substantially consistent.