Abstract
New orientations for longitudinal leaky SAW with small propagation losses and high velocities in lithium niobate (LN) and lithium tantalate (LT) have been found. Their velocities are 6100 to 6500 m/s in LN and 5200 to 5800 m/s in LT. Their propagation losses are almost negligible only in the case of an Al-grating structure. For example, the Al thickness relative to the SAW wavelength must be 8.4% for 171 degrees YZ'-LN; for 133 degrees YZ'-LT, the value must be 9.2%. These propagation properties were obtained by using a simulator that combined both finite-element and analytical methods. These results were also well confirmed by measuring the impedance responses of one-port SAW resonators.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
