Abstract
A series of NdV/Ti-x% catalysts were prepared by a microwave-assisted deposition-precipitation method, and their catalytic performance for the selective catalytic reduction (SCR) of NO by NH3 was investigated. Impressively, the SCR activity of the obtained catalyst was markedly influenced by the amount of vanadate added. The results show that the NdV/Ti-x% catalysts not only possess good low-temperature catalyst activities but also exhibit excellent SO2 resistance performances in the presence of 300 ppm SO2 and/or 10 vol % H2O. Furthermore, SO2 promotes the activity of the NdV/Ti-10% catalyst. These catalysts were characterized using X-ray diffraction (XRD), H2 temperature-programmed reduction (H2-TPR), NH3 temperature-programmed desorption (NH3-TPD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), in situ diffuse reflectance Fourier transforms (DRIFTs), etc. The in situ DRIFT results indicate that the NH3-SCR reaction over the well-dispersed vanadate catalyst follows the Eley–Rideal (E–R) and Langmuir–Hinshelwood (L–H) mechanisms. In particular, the SCR reaction following the E–R mechanism is rapid and significantly improves SO2 tolerance. In addition, the SO2 adsorption could be restrained on the NdV/Ti-10% catalyst, which effectively restrained the deposition of sulfate species and endowed catalysts with strong SO2 tolerance. Meanwhile, the effective suppression of SO2 adsorption allowed the NdV/Ti-10% catalyst to maintain Eley–Rideal (E–R) pathways. This work paves the way for the development of high-performance SO2-tolerant SCR catalysts.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.