Abstract
The effect of the additive Ce on V2O5-WO3/TiO2 with low vanadium loadings for the selective catalytic reduction (SCR) of NOx with NH3 was investigated. The catalytic activity of 0.1% V2O5-6% WO3/TiO2 (V0.1W6Ti) was greatly enhanced by the addition of 10 wt % of Ce in the broad temperature range of 200−500 °C. The catalysts were characterized by BET, XRD, XPS, TPD, H2-TPR, and DRIFTS. The results indicated that the active components of V and W were well-dispersed, while a small cluster of cubic CeO2 appeared over the V0.1W6Ce10Ti catalyst. The Ce additive could enhance the NOx adsorption and then accelerate the SCR reaction due to the synergetic interaction among the Ce and V,W species. Ce mainly existed in the form of Ce3+ oxide in V0.1W6Ce10Ti catalysts, which was beneficial for the oxidation of NO to NO2. Moreover, the DRIFTS results showed that the Ce additive on V0.1W6Ti could provide stronger and more active Bronsted acid sites, which were beneficial for the SCR reaction. The Ce additive also enhance...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.