Promising ferroelectric and piezoelectric response of Cr-doped ZnO nanofiller-incorporated PVDF flexible and laminated nanocomposite system.

Abstract

Cr3+-doped ZnO (CZ) nanoparticles are prepared using hydrothermal and co-precipitation techniques. The desired crystallographic phase of the nanoparticles is confirmed using X-ray diffraction study. Rod-shaped and spherical morphologies of CZ nanoparticles prepared using hydrothermal and co-precipitation techniques were confirmed through FESEM observation. Each type of nanoparticle was taken separately in PVDF to understand the characteristic properties, such as dielectric, piezoelectric, and ferroelectric properties of the resultant CZ-PVDF nanocomposite films. All the nanocomposite films comprising rod-shaped or spherical CZ nanoparticles show butterfly loops with a low leakage current density of 10-5 A m-2 at a maximum electric field of 100 kV m-2 under J-E measurement. These findings suggest that the polarization property of CZ-PVDF nanocomposite films can be obtained at a high external electric field without causing electric breakdown in the samples. Dielectric permittivity as a function of temperature increases with an increase in the loading percentage of both rod-shaped or spherical CZ nanofillers in PVDF. Polarization response also improves with an increase in the loading percentage of CZ nanofillers in PVDF. In particular, the rod-shaped CZ nanofillers in PVDF with a higher loading percentage (CZHP2) result in a maximum polarization of (10 ± 0.29) × 10-4 μC cm-2, remanent polarization of (2 ± 0.04) × 10-4 μC cm-2, and coercive field of (10 ± 0.1) kV cm-1 at a maximum electric field of 50 kV cm-1. The CZHP2 nanocomposite film has a piezoelectric coefficient (d33) of (25 ± 0.24) pC N-1 and a power density of 1278.90 W m-3. These results indicate that the nanocomposite films have potential application in piezoelectric energy harvesters, offering a possible solution to the energy issue faced by modern society.