Promising biomass-based activated carbons derived from willow catkins for high performance supercapacitors

Abstract

Unusual sheets-like primary activated carbon particles interconnected into three-dimensional micrometer-level large pores were prepared from a novel biomass named willow catkins (WCs) by KOH chemical activation process and used as electrode materials for supercapacitors. The pore structures, surface area and chemical properties could be facilely adjusted by changing the activation temperature. When the activation temperature increased from 600 to 800°C, the specific surface area of the porous carbon product increased remarkably while the contents of nitrogen and oxygen co-doped decreased, which significantly affected the electrochemical properties of the porous carbon-based supercapacitors. The activated carbons from 600°C activation possesses despite moderate specific surface area (645m2g−1), concentrated pore size distribution of 0.77nm, but high nitrogen (2.51wt.%) and oxygen (13.28wt.%) contents, high graphitization degree as well as good electrical conductivity. The supercapacitors with the carbon electrode reached maximal specific capacitances of 340Fg−1 and high specific surface capacitance of 52.7μFcm−2 at the current density of 0.1Ag−1, good rate capability (231Fg−1 at 10Ag−1) and good cycling stability (92% capacitance retention over 3000 cycles). The favorable capacitive performances make the waste biomass WCs act as a new resource of carbonaceous materials for high performance supercapacitors.