Promising and Environmentally Friendly Removal of Copper, Zinc, Cadmium, and Lead from Wastewater Using Modified Shrimp-Based Chitosan

Abstract

This study explores the potential of modified shrimp-based chitosan (MSC) as an innovative adsorbent for eliminating heavy metals (HMs) from contaminated water sources. The modifications encompassed various chemical treatments, surface functionalization, and structural optimization to enhance the chitosan’s adsorption capabilities. Comprehensive analyses using FT-IR and SEM-EDS were conducted to evaluate the properties of the chitosan. The adsorption capacity of MSC was assessed using ICP-MS before and after the adsorption process. Moreover, the study investigated the efficiency of HM removal by MSC under different conditions, including variations in pH, adsorbent dosage, and contact time. Under neutral pH conditions, the highest adsorption rates of copper, zinc, cadmium, and lead were determined as 99.72%, 84.74%, 91.35%, and 99.92%, respectively, with corresponding adsorption capacities of 20.30 mg/g for copper, 7.50 mg/g for zinc, 15.00 mg/g for cadmium, and 76.34 mg/g for lead. Analysis based on the Langmuir and Freundlich isotherm models revealed highly significant adsorption of HMs, supported by strong correlation coefficients (r2 > 0.98) obtained from the data. The pseudo-second-order kinetic model with linear coefficients (r2) greater than 0.97 effectively explained the kinetic studies of metal adsorption employing modified shrimp shells. These coefficients indicate a robust fit of the models to the experimental adsorption data for heavy metals. Further confirmation of the effectiveness of the adsorbent was obtained through FT-IR spectroscopy, which confirmed the presence of specific functional groups on the adsorbent, such as N–H joined with –COO−, H–O, C−O−C, and C–H. Additionally, the SEM-EDS analysis detected the presence of elements on the surface of MSC chitosan. The results emphasize that MSC is a highly effective and cost-efficient adsorbent for eliminating Cu, Zn, Cd, and Pb from wastewater, making it a promising eco-friendly choice.