Progress in the design and construction of SPES at INFN-LNL

Abstract

INFN-LNL is constructing an ISOL (Isotope Separation On Line) facility delivering neutron rich ion beams at 10AMeV or beyond, making use of the linear accelerator ALPI as the secondary accelerator. The facility includes a direct ISOL target based on UCx and able to reach 1013fissions/s. In parallel, an applied physics facility will be developed, with applications in medicine and neutron production. The SPES project is a national facility, approved and funded. Commissioning with the first exotic species is expected in 2019. The primary accelerator is a commercial cyclotron, which will send a 40MeV, 200μA proton beam onto an UCx target, connected to SIS, PIS and LIS ion sources. The extracted beam is purified through a Low Resolution Mass Separator (LMRS, i.e. a Wien filter and a dispersive dipole), a beam cooler and a High Resolution Mass Separator (HRMS) and sent to an ECR charge breeder to boost the exotic beam charge state. The highly charged exotic beam is further separated in a MRMS (Medium Resolution Mass Separator) and injected into a 100% duty cycle RFQ and into the existing superconducting linac ALPI, which will be refurbished and upgraded to be an efficient exotic beam accelerator. The upgrade of ALPI will give ∼10AMeV energy to 132Sn19+, taken as the reference ion beam. The paper presents the status of the design and construction of the SPES facility.