Abstract
In this study we introduce a simple program for cyclic current–voltage (I–V) measurements for bipolar and unipolar resistive switching devices. This program (Cyclic I-V, CYC-IV) was developed under the Keysight VEE Pro (Visual Engineering Environment Program) software and has a graphical interface. CYC-IV was developed for programming the Keysight B2912 Precision Source/Measure Unit (SMU) for I-V measurement of resistive switching devices in sweep mode. CYC-IV can be used in six different sweep mode. Moreover, the ramp rate, upper and lower limits of bias, cycle delay time and number of cycles easily define by user. Measurement results were visualized in three graphs that can be viewed simultaneously with the measurements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.