Abstract

We report mass spectrometric studies of the products of thermal decomposition of triethylgallium (TEGa), and trimethylgallium (TMGa) adsorbed on Ga-stabilized GaAs(100) in ultrahigh vacuum. Adsorbed layers were prepared by dosing clean GaAs, near room temperature, to either saturated coverage or coverages below saturation. Subsequent heating leads to desorption of products, detected by a differentially pumped quadrupole mass spectrometer. Total carbon coverage was monitored by X-ray photoelectron spectroscopy (XPS). The substrate temperature was measured by infrared laser interferometric thermometry. At saturated coverage, TEGa decomposes upon heating (1–2°C/s) to yield one third Ga-alkyl product (Ga(C 2H 5) 2) between 0 and 300°C, and two thirds hydrocarbon products (mostly C 2H 4 and some C 2H 5) between 250 and 390°C. About 25% of the Ga deposited from TEGa remains on the surface after all products desorb. Below 40% of saturated coverage, only the higher temperature hydrocarbon products desorb, and all adsorbed Ga remains on the surface. TMGa behaves similarly; starting at saturated coverage, Ga-alkyl product (either Ga(CH 3) 2 or a mixture of Ga(CH 3) 2 and TMGa) desorbs at low temperature (50–380°C) and hydrocarbon product (CH 3) desorbs at higher temperature (250–425°C). However, for TMGa the yield of the Ga-alkyl is about twice the CH 3 yield. No ethane, or butane was detected in TEGa decomposition, nor was any ethane found for TMGa decomposition, indicating that association and disproportionation reactions are unimportant. Also no As-alkyl products were detected. The slower rate of desorption of CH 3 for TMGa decomposition, compared to C 2H 4 and C 2H 5 desorption from TEGa decomposition, qualitatively explains higher carbon levels in GaAs films grown with TMGa versus TEGa.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.