Abstract

The severe pretreatment of poplar makes xylan difficult to utilize efficiently. In this work, poplar was pretreated by hydrogen peroxide–acetic acid (HPAC) with H2SO4 as catalyst to remove lignin, and the solid residues were used to produce xylooligosaccharides (XOS) and monosaccharides by two-step xylanase and cellulase hydrolysis. The results indicated that higher H2SO4 concentrations in the HPAC pretreatment of poplar afforded stronger lignin removal ability. An increased XOS yield of 19.8% was obtained from 200 mM H2SO4-catalyzed poplar by xylanase and the XOS purity was high, with a very low xylose/XOS ratio of 0.14. Higher glucose (75.2%) and xylose (61.4%) yields were obtained from the HPAC-pretreated poplar using 50 mM H2SO4 as catalyst. Finally, 16.9 g XOS and 296.4 g glucose were produced from 1 kg poplar by xylanase and cellulase. This study provides a method for producing functional XOS and monosaccharides from poplar using a simple reduced-pollution strategy.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.