Production of Vegetable Transplants with the Controlled Water Table Irrigation System

Abstract

Cabbage seed was germinated and grown to transplanting size in a 98-cell tray using an automatic irrigation system based on the principle of maintaining a constant water table (CWT) relative to the growing medium in transplant trays. Seedlings obtained a nutrient solution from a capillary mat with one end suspended in a trough containing the solution. The distance between the nutrient solution surface and the transplant tray bottom was regulated with a water level controller. The nutrient solution was resupplied from a larger reservoir. A polyester material on top of the capillary mat allowed solution movement to the roots but prevented root penetration into the mat. The water table placement below the tray determined the water content in the growing medium. Seedling growth was evaluated using two growing media combined with two water table placements. Excellent quality seedlings were produced; the CWT irrigation system satisfactory provided water and nutrients for the duration of the crop. The only problems observed were dry cells, less than 2%, because of no media–mat contact and algae growth on the media surface using the higher water table. The CWT irrigation system is adaptable to existing greenhouse vegetable transplant production systems. It is automatic and can provide a constant optimum amount of moisture for seedling growing. It can be adjusted for phases of seedling growing such as more water during germination and can create water stress near transplanting time to either harden off or hold plants because of unfavorable planting conditions.