Abstract
At the joining of non-removable plastic parts, the methods such as friction welding, friction-stir welding, ultra-sonic welding, chemical joining, hot-plate welding use. Rotary friction welding, which is one of the friction welding methods, is generally used for joining the filter parts of water treatment devices. After rotating friction welding of the filter parts, semi-melted agglomerations are formed in the inner parts. To prevent semi-melted accumulation, weld joint profile design was developed in the ABAQUS program in the previous study. In this study injection molds had been produced and production according to weld joint profile design. The taken plastic presses were welded with the friction welding machine and the joint was controled and compared. It is seen that the semi-melted agglomeration was successfully confined. By performing Taguchi experimental method and ANOVA analysis on friction welding machine parameters the optimum pressure conditions were determined, aimed to carry out static and dynamic tests according to NSF standards and field tests by producing 1500 pilots product and it has been put into use. The lifetime of the developed filter depends on the material which was used in manufacture. In the next study, it is aimed to improve the lifetime of the developed filters.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Strojniški vestnik - Journal of Mechanical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
