Abstract
In this study, palm fatty acid distillate (PFAD) was selected as the feedstock for biolubricant base oil production in two-stroke engine oils’ formulation. PFAD is a low-cost palm refinery by-product with a high free fatty acid (FFA) content (85%). The esterification of PFAD with neopentyl glycol (NPG) was conducted in the presence of a solid acid catalyst (SO42-/Fe2O3/Al2O3) to produce PFAD-NPG ester. Optimization profile indicated that PFAD conversion and PFAD-NPG ester yield were 84% and 82%, respectively, under optimum reaction conditions of 180 °C, 4 h, 2.0 wt% SO42-/Fe2O3/Al2O3 catalyst loading and a 2:1 PFAD to NPG molar ratio. The physicochemical properties of the base oil successfully comply with the Japanese Automotive Standards Organization (JASO) M345:2018 requirements for two-stroke oils in terms of sulfated ash content, kinematic viscosity at 100 °C and flash point. In addition, reusability of solid acid catalyst, SO42-/Fe2O3/Al2O3 was investigated, where PFAD conversion and PFAD-NPG ester yield were found to be excellent at 81% and 80%, respectively, which showed that the catalyst had good consistency after 5 cycles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
