Abstract

The study involves the use of periwinkle shell particles as reinforcement in the production of grindstone to meliorate its physical and mechanical properties. The assessment of the properties of the periwinkle shell reinforced concrete grindstone showed that reinforcement yielded several promising results. The compressive strength was higher for samples with lower water/cement ratio (7%) than those with higher water/cement ratio (10%). The introduction of concrete that contains periwinkle shells as fine aggregates resulted in the loss of smooth like appearance and reduction in weight. The loss of its smooth like nature introduces the rough nature which improved its functionality. The reinforced sample had the lowest hardness test and in hardness test the lower the number the higher the hardness. There was an increase in the density after absorption test was carried out on specimens. There was also reduction in production cost with periwinkle shells partial replacement of cement and gravel as fine aggregate. The composite was adequate for grindstone production since its sample has a compressive of 18.15Mpa and thus satisfied MOR requirements of 11.5 MPa for general purpose boards.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.