Abstract
Electrostatic atomization in liquid-in-liquid media has been performed to produce fine droplets with narrow size distribution. The droplet diameter was controlled from mm to mum with applying dc voltage. When ac superimposed on dc voltage was applied, uniformly-sized droplets were produced. The high frequency pulsed voltage was effective to disperse liquid into nm-sized droplets. Water glass aqueous solution was dispersed in alcohol solution, and then they were solidified into solid particles by dehydration. The diameter of the dispersed particles was measured with a laser scattering particle analyzer. Particle diameter was depended on the applied pulse frequency and voltage, flow rate of the water glass, and water glass concentration. With increasing applied pulse frequency, the particle diameter and size distribution were decreased. Particles with 200 nm average diameter were produced at 1 kHz and 5.3 kV of applied pulse.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Dielectrics and Electrical Insulation
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
