Production of Mineral-Carbon Composites and Activated Carbons as a Method of Used Gear Oil, Ashes, and Low-Quality Brown Coals Management.

Abstract

The main objective of this study was to assess the usefulness of the low-quality brown coal, ash obtained as a result of its combustion, as well as used gear oil for the production of mineral-carbon adsorbents. The adsorbents were characterized in terms of textural parameters, acidic-basic character of the surface, mineral matter contribution to the structure, as well as their suitability for drinking water purification. Adsorption tests were carried out against two synthetic dyes-methylene blue and methyl orange. In order to understand the nature of the organic pollutants adsorption, the effect of the initial dye concentration, temperature, and pH of the system as well as the phase contact time were investigated. The obtained mineral-carbon composite and activated carbons significantly differed not only in terms of the elemental composition and chemical character of the surface (from slightly acidic to strongly alkaline), but also showed a very diverse degree of specific surface development (from 21 to 656 m2/g) and the type of porous structure generated (from micro/mesoporous to typically mesoporous). Adsorption tests showed that the efficiency of organic dye removal from aqueous solutions primarily depends on the type of the adsorbent and adsorbate applied, and, to a lesser extent, on the temperature and pH of the system. In turn, kinetic studies have shown that the sorption of dyes on such materials is consistent with a pseudo-second-order kinetics model, regardless of the type of adsorbed dye.