Abstract

In this study, we discuss producing radioisotopes using linear electron accelerators and address production and separation issues of photoneutron (γ,n) and photoproton (γ,p) reactions. While (γ,n) reactions typically result in greater yields, separating product nuclides from the target is challenging since the chemical properties of both are the same. Yields of (γ,p) reactions are typically lower than (γ,n) ones, however they have the advantage that target and product nuclides belong to different chemical species so their separation is often not such an intricate problem. In this paper we consider two examples, 100Mo(γ,n)99Mo and 68Zn(γ,p)67Cu, of photonuclear reactions. Monte-Carlo simulations of the yields are benchmarked with experimental data obtained at the Idaho Accelerator Center using a 44MeV linear electron accelerator. We propose using a kinematic recoil method for photoneutron production. This technique requires 100Mo target material to be in the form of nanoparticles coated with a catcher material. During irradiation, 99Mo atoms recoil and get trapped in the coating layer. After irradiation, the coating is dissolved and 99Mo is collected. At the same time, 100Mo nanoparticles can be reused. For the photoproduction method, 67Cu can be separated from the target nuclides, 68Zn, using standard exchange chromatography methods. Monte-Carlo simulations were performed and the 99Mo activity was predicted to be about 7MBq/(g⁎kW⁎h) while 67Cu activity was predicted to be about 1MBq/(g⁎kW⁎h). Experimental data confirm the predicted activity for both cases which proves that photonuclear reactions can be used to produce radioisotopes. Lists of medical isotopes which might be obtained using photonuclear reactions have been compiled and are included as well.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.