Abstract
Compost is organic matter that has undergone partial thermophilic, aerobic decomposition. This environmentally safe process is called composting. The combination of raw materials and the chosen composting method yields a wide range of characteristics, such as organic matter (OM) content, nutrient content, potential for disease suppressiveness and other physical, chemical, and biological properties. The objectives of this review are describing the horticultural outlets for composts, defining compost characteristics important for the above uses, and describing composting procedures and raw materials leading to these characteristics. The two main horticultural uses of composts are as soil amendment and as an ingredient in container media. Soil-applied composts improve soil fertility mainly by increasing soil organic matter (SOM) that activates soil biota. Compost's nutrient content, and especially that of nitrogen (N), should be high (>1.8%). Composts having these characteristics are produced of raw materials rich in both OM and N, while minimizing their loss during composting. Typical raw materials for this purpose include animal manures, offal, abattoir residues, sewage sludge, and grass clippings. Various composting methods can yield the required results, including turned windrows, aerated static piles, and in-vessel composting. Composts are also used for substrates as low-cost peat substitute, potentially suppressive against various soilborne diseases. These composts must be stable and non-phytotoxic. Physical properties of compost used as substrate are important. Hydraulic conductivity, air porosity, and available water should be high. Reconciling the physical and biological demands may be difficult. Materials such as softwood bark, wood shavings, various types of shells or hulls, and coconut coir are characterized by good physical properties after composting. However, being relatively resistant to decomposition, these materials should be subjected to long and well-controlled composting, which may be shortened using N and N-rich organic matter such as animal manures. High temperatures [>65 °C (149.0 °F)] may cause ashing, which leads to reduced porosity. In addition to ligneous materials, composts serving as growing media may be produced from numerous organic wastes, such as manures, food industry wastes, etc. These materials are better composted in aerated static piles, which tend to minimize physical breakdown. Animal excreta are of special value for co-composting as they contain large, diverse populations of microorganisms, which accelerate the process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have