Abstract
High nitrogen containing austenitic stainless steel X8CrMnN18-18 exhibits attractive combination of high strength, toughness and corrosion resistance.This grade containing more than 5000 ppm of nitrogen was produced commercially through EAF-AOD-LRF-CC-Steckel mill route and its microstructure and mechanical properties were studied. Excellent combination of strength,ductility and toughness is achieved in the entire range of 6mm to 50mm thick hot rolled plates. Uniaxial compression tests were carried out to understand the hot deformation behavior by varying temperature and strain rate. Softening behavior during deformation was analyzed from flow stress strain curves and microstructural analysis. Dynamic recrystallization (DRX) behavior of the material was observed during thermo mechanical processing. Critical strain related to DRX and Avrami kinetics of DRX was calculated by analyzing the flow curve data. Microstructural characterization was done by optical microscopy and EBSD analysis. Extensive grain refinement can be achieved by thermo-mechanical processing controlled by DRX. Keywords: High nitrogen stainless steel, Strength and toughness, DRX, Grain refinement, TMCP
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
