Abstract
An electro slag crucible melting process for production of copper–chromium alloys is described. The process uses fine copper scrap as a raw material. After the copper scrap is melted, chromium is alloyed with copper by direct reduction of chromium oxide added to the slag. Carbon and aluminum can be used as reductants and the reduction is carried out in situ in the molten slag. Copper chromium ingots containing up to ∼1 wt % chromium were produced by this process. The process serves the dual purpose of recycling copper scrap and alloying remelted copper by chromium. This is the first time that direct reduction has been employed during an electro slag melting process. The in situ reduction technique described has the potential of being a production route for a variety of alloys. It is particularly suitable for production of difficult-to-melt alloys such as copper–chromium.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.