Production of a bioflocculant from Enterobacter sp. P3 using brewery wastewater as substrate and its application in fracturing flowback water treatment.

Abstract

A novel bioflocculant (BW-P3) was produced by a strain of Enterobacter sp. P3 using brewery wastewater as substrate and was further applied to remove the colored substance of fracturing flowback water. The optimum conditions for bioflocculant production were specified by the response surface methodology as COD of brewery wastewater 1487.77mg/L, glucose 8.94g/L and initial pH7.09, under which a bioflocculant yield of 1.274g/L could be reached. The BW-P3 consists of 79.12% polysaccharides and 15.63% protein. Results show that BW-P3 has a high molecular weight (921kDa) and contains functional groups (hydroxyl, amino, carbonyl, and acylamino) that likely contribute to flocculation. When using the BW-P3 to flocculate fracturing flowback water, the optimal dosage was 1g/L BW-P3 with addition of 100mg/L polymeric aluminum chloride as coagulant aid, and treated under 50°C at pH7. Under the optimal condition, the removal rates of chroma and suspended solids (SS) of the fracturing flowback water could reach 85% and 52%, respectively.