Abstract
This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper OTC 30644, “Discovery of New Oil Reserves by Combining Production Logging With Openhole-Log Interpretation in Low-Resistivity Pay,” by Xinlei Shi, Peichun Wang, and Jinxiu Xu, CNOOC, et al., prepared for the 2020 Offshore Technology Conference, originally scheduled to be held in Houston, 4–7 May. The paper has not been peer reviewed. Copyright 2020 Offshore Technology Conference. Reproduced by permission. In this paper, the authors examine the evaluation of a low-resistivity-pay siliciclastic reservoir in Bohai Bay, China. A significant amount of irreducible water is bound to the rock surface, dramatically lowering the resistivity of the pay zone. The authors explore a theory that the low resistivity is caused by bound water trapped in clay minerals, using production logging to provide the ground truth of reservoir fluids in the low-resistivity pay and improve the petrophysics model. With the improved model, production predictions were made for offset wells based on their openhole logs. The production histories of these wells are highly consistent with the authors’ predictions. Introduction LD oil field is in the eastern Bohai Sea, China, structurally in the transition zone between the Liaohe depression of the Tanlu fault and the Bozhong depression and at the dip end of the Bodong low uplift extending to the northeast. The main oil reservoirs are developed in the Guantao and Dongying formations. Reservoir depth ranges from approximately 1022.1 to 2585.8 m. Reservoir lithology is mainly sandstone and gravelly sandstone. The porosity distribution range of the Guantao formation is 24 to 30%. Permeability distribution range is 333 to 3333 md belonging to medium-high-porosity and - permeability reservoirs. The porosity distribution range of the Dongying formation is from 6 to 12%, and the permeability distribution range is from 3 to 33 md belonging to medium-low- porosity and -permeability reservoirs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
