Abstract

Shisaka Smelting Co., Ltd. has recovered crude zinc oxide pellets from an electric arc furnace dust (EAF dust) by the Waelz kiln process since 1977. The EAF dust processing line consists of a reduction roasting process, a Waelz oxide washing process, and a drying/calcination process. In late years, about 90,000 tons of EAF dust is processed annually at Shisaka. The recovered zinc is sold to zinc smelters as crude zinc oxide pellets, and the amount of production of the pellets is about 40,000 tons per year. Two types of zinc oxide pellets are produced, and the product for electro-refinery requires high quality, especially in fluorine reduction. Most of fluorine are distributed to the clinker in a reduction roasting process, and others are distributed to the Waelz oxide. Conventionally, high-grade crude zinc oxide pellets were produced by washing the Waelz oxide and by volatilizing and separating fluorine under high temperature operation in a drying rotary kiln. However, formation of accretion in the kiln and damage of the shell and refractories of the kiln often occurred under the influence of high temperature operation, and stable consecutive operation of the kiln was difficult.To improve this situation, the fluorine input was reduced by compounding management of EAF dust in the reduction roasting process, and the material residence time in the drying rotary kiln was extended by reducing rotary speed. These improvements resulted in stable consecutive operation under low temperature conditions and increased production of high-grade crude zinc oxide pellets. To improve this situation, the fluorine input was reduced by compounding management of EAF dust in the reduction roasting process, and the material residence time in the drying rotary kiln was extended by reducing rotary speed. These improvements resulted in stable consecutive operation under low temperature conditions and increased production of high-grade crude zinc oxide pellets.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call