Abstract
Water contamination by nitrogen and phosphorus ions has a direct consequence of eutrophication to the ecosystem. The objective of this study is to investigate the production of hydrochars by acetic acid or sodium hydroxide assisted hydrothermal carbonization (HTC), various activation methods, and the potential of hydrochar as an adsorbent to remove NH4+-N and PO43--P from wastewater. The results showed that acetic acid or sodium hydroxide assisted HTC and activation with magnesium chloride or air could improve the surface properties of hydrochar. Acetic acid modification generated extensive oxygenated functional groups, while sodium hydroxide modification produced hydrochar with a high N/C ratio and surface aromaticity. Treating hydrochar with magnesium chloride could impregnate nano-magnesium particles on the hydrochar, thereby improving the ability to remove N and P. Air activation of hydrochar resulted in more oxygen containing functional groups. The NH4+-N and PO43--P adsorption capacities of these hydrochars ranged from 92.6 to 122.4mg/g and 1.6 to 15.8mg/g, respectively. The adsorption capacity of hydrochars in swine wastewater is similar to the results of artificial wastewater. The results suggested that Mg-nanoparticle dispersion and oxygen-containing functional groups played a major role in adsorption than ion exchange and physisorption.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
