Abstract
Kesterite CZTS films were produced to contain pure sulphide anion without any metal substitution, and optimization studies were carried out by changing the flow rate of H2S at the sulphurization stage. Effect of flow rate on the properties of CZTS films were evaluated in detail. All films were grown in polycrystalline structure with a preferential orientation through (1 1 2) plane. The intensity of the characteristic peak was higher for the samples sulphurized at high flow rates, indicating a better crystallization. Raman spectra showed no peaks indicating a second phase for any film. Optical band gap values were calculated to be between 1.43 and 1.56 eV in accordance with the literature. Especially the sample obtained at a flow rate of 40 sccm is a promising sample in terms of suitable properties which may affect the conversion efficiency in photovoltaic solar cells. At low H2S flow rates, it was determined that the surface of the films contains defects in the form of cracks/voids. This work evaluates and refers that by selecting appropriate flow rates at the sulphurization stage, CZTS films with improved characteristics for photovoltaic applications can be achieved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.