Abstract
Abstract - PT.I is a company that produces synthetic rattan furniture on an export scale. The various products at PT.I are an attraction for consumers, such as classic and modern weaving models. However, the number of defects produced is higher than the tolerance limit company. Based on data from the weaving section, it shows that there are 5 types of defects that are not in accordance with the standards and quality that have been determined by the company. The purpose of this study is to identify the types of defects that often occur in PT. I and identify the main factors causing product defects using the SPC method. The seven tools consist of a check sheet, histogram, stratification, scatter diagram, p control chart, Pareto diagram, and fishbone diagram. The results showed that the number of defects in October and November exceeded the limit set by the company. The highest level of disability occurred in October. The higher the number of production, the higher the number of product defects. Based on the results of the p control chart, it can be seen that the product is outside the control limits that it should have. The process is in a state of uncontrollability or is still experiencing deviations. To suppress or reduce the number of product defects that occur in production, 3 types of dominant defects can be applied, namely the woven model (254 units), loose woven (122 units), and nail-looking woven (119 units). Factors causing defects in production are derived from human factors/workers, methods, materials/raw materials and work environment.
Highlights
PT.I is a company that produces synthetic rattan furniture on an export scale
I is an attraction for consumers, such as classic and modern weaving models
The weaving process is very important in terms of product quality, in the weaving process, there are still non-conformances with the company's standards, such as the color of the woven material that is not the same, loose woven, dirty woven, visible woven nails or soldering, and twists/woven models
Summary
PT.I is a company that produces synthetic rattan furniture on an export scale. Weaving is a weaving process by overlapping (crossing) woven material in the form of synthetic rattan. The weaving process is very important in terms of product quality, in the weaving process, there are still non-conformances with the company's standards, such as the color of the woven material that is not the same, loose woven, dirty woven, visible woven nails or soldering, and twists/woven models. This can be seen in the weaving process in October-November 2020
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Computer and Information System (IJCIS)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
