Abstract
Solar pyrolysis of pine sawdust, peach pit, grape stalk and grape marc was conducted in a lab-scale solar reactor for producing fuel gas from these agricultural and forestry by-products. For each type of biomass, whose lignocellulose components vary, the investigated parameters were the final temperature (in the range 800°C–2000 °C) and the heating rates (in the range 10–150 °C/s) under a constant sweep gas flow rate of 6 NL/min. The parameter influence on the pyrolysis product distribution and syngas composition was studied. The experimental results indicate that the gas yield generally increases with the temperature and heating rate for the various types of biomass residues, whereas the liquid yield progresses oppositely. Gas yield as high as 63.5wt% was obtained from pine sawdust pyrolyzed at a final temperature of 2000 °C and heating rate of 50 °C/s. This gas can be further utilized for power generation, heat or transportable fuel production.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.