Abstract
The amplified signal input from the hearing‐aid microphone is split into one‐third octave bands, each having its own processor‐controlled band amplilfier. Control signals are obtained from a feedback probe microphone at the medial end of the hearing aid earmold. This signal is analyzed into one‐third octaves, digitized, and compared to stored band levels in the processor (as obtained from the audiologically specified eardrum SPL and spectrum). The gain of each band amplifier is controlled by the processor so that the spectrum and SPL at the eardrum is the same as the stored spectrum and SPL regardless of variations in input signals, hearing aid characteristics, and external ear acoustics. Processor control of averaging, attack, and release times have been provided. Preliminary ANSI S3.25‐1979 simulator graphic and listening tests show that band levels and averages at the eardrum are maintained within a few dB for variations of over 30 dB in the input spectrum and level.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.