PROCESSING OF WELLHEAD CHRISTMAS TREES PIPE HEADER

Abstract

In this study, the components of the tubing head of the Wellhead Christmas tree are classified. Information on how to install the tubing head to the Christmas tree (oil and gas) is also provided. The tested tubing head ensures the passage of liquid or gas into the spaces between the tubes. They have to control the pressure and conduct the necessary well studies. The tubing header seals and hangs the riser columns, which is especially effective when inserting concentric or parallel columns into the well. As a result of the conducted studies, the tubing head fully controls the flow of the technological liquid. Tubing headers to perform these processes should be manufactured according to the working pressure requirements between 14 and 105 MPa. Using a tubing head, you can connect different numbers of pipelines, as well as control the distribution of the medium flow in the circular zone of the valve. Of the cost-effective methods we have mentioned one is connected to the upper flange of the pipeline column header with a lower mounting fixing component. The design of the tubing head is completed by threaded holes in the body through which you can quickly replace the side valves in the head tube. The tubing head is designed to stop one or more rows of riser (pump and compressor) tubes and is used to perform technological operations during the development, operation and repair of wells. The top of the tubing at the wellhead is screwed into the tubing cap of the Christmas tree (oil and gas). Once installed at the wellhead, the Christmas tree (oil and gas) tubing header is compressed to the allowable pressure for pressure testing the production casing. Tubing head design and strength characteristics are shown in this figure: a) working pressure (7, 14.21, 35, 70 and 105 MPa), b) numbers of pipes lowered into the well (one and two concentric rows of pipes), c) constructions of locking devices (valves and taps) dimensions of the flow section along the trunk (50... 150 mm) and side branches (50... 100 mm). The tubing head holds and takes over the pressure generated between the tubes and can be prohibitive, which is quite dangerous for people's lives and health. Keywords: Christmas tree (oil and gas), tubing header, pressure, flow, wellhead, test, well.