Abstract
Boron carbide is one of the potential neutron-shielding materials and its use can be maximized for structural shielding application by dispersing it into metal matrixes such as aluminum. Dispersion of B4C and its interfacial stability is a major issue during its processing. This investigation is on the synthesis of B4C-reinforced 6061 aluminum matrix composite by liquid–metal stir-casting technique under optimized conditions after solving the issues related to the processing, and evaluation of the structural, mechanical, and interfacial characteristics. During processing of composites, pretreatment of B4C particles is necessary to improve its dispersion. However, higher preheating temperatures above 300°C lead to particle agglomeration in the matrix due to the formation of B2O3 phase during preheating. B2O3 is formed due to the surface oxidation of B4C particles above 300°C and this glassy phase leads to particle sintering and lump formation. Incorporation of particles preheated at 250°C has shown uniform distribution of particles in the composite. Interfacial characterization of the composite and the extracted B4C particles from the matrix has shown the presence of interfacial reaction products such as AlB2, Al3BC, AlB12, and AlB10.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
