Abstract
The problem of dispersion of nano-additives in thermoplastic elastomers using continuous processing techniques still prevails in scientific and engineering applications. To address this, supercritical fluid (SCF) assisted extrusion was utilised to develop elastic, isotropic and electrically superior materials, which contain elastomeric microphases of Poly(styrene-ethylene-butylene-styrene [SEBS] with homogeneously dispersed conductive nano-additives of carbon black [CB]. SEBS-SCF/CB 5 wt% extrudates showed 46% and 14% higher storage modulus compared to their counterparts in transverse and longitudinal direction respectively. Similarly, piezo-resistive properties of SEBS-SCF/CB composites were found to have a superior strain gauge factor with linear decrease in conductivity with increasing strain, compared to nonlinear increase/decrease in piezoresistive behaviour of SEBS/CB composites. Piezo-resistivity of SEBS-SCF/CB 5 wt% nanocomposites were found to be highly sensitive in both bending (3.6% change in resistance per degree for 1.7 cm thick sample) and tensile strain conditions (gauge factor ca. 9) for smart applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
