Processing of Ferruginous Chromite Ore by Dry High-Intensity Magnetic Separation

Abstract

ABSTRACTMineral and morphological characteristics of chromite ore strongly affect the separation efficiency while upgrading the low-grade deposits. Usually, chromite ore enrichment is carried out by using gravity separation due to high-concentration criterion between chromite and other minerals. However, chromite ore from Sukinda region, India, is a typical ore body with high iron content in the chromite spinel as well as gangue content in the form of oxide and hydroxides of iron-bearing minerals. So, the separation efficiency reduces by gravity method due to the lower value of concentration criterion. To address this, dry magnetic separation is an alternative approach to separate these iron-bearing gangue minerals from the chromite. This work investigated on the application of different dry high-intensity magnetic separators to separate the chromite grains from ferruginous chromite ore deposits of India. Prior to the separation, two different ore deposits of Sukinda region are subjected to detailed mineral, chemical, morphological, as well as magnetic properties characterization to visualize the separation. Tests confirm the effect of magnetic field strength along with other process parameters that influence the process of the separation of iron-bearing gangue minerals. The results on these separators are related to the influence of mineralogy, process parameters, and magnetic property of minerals, based on the experimental and statistical analysis of the process. Also, effect of desliming of the low-grade deposit prior to the dry magnetic separation is highlighted.