Processing of automotive shredder residues: Economic evaluation of a process for energy and high-value metals recovery

Abstract

Challenges in recycling heterogeneous waste remain untapped. Automotive shredder residue is one such heterogenous waste generated after processing End-of-Life Vehicles, making it difficult to process. There are two impediments to the recycling of ASR. One is the heterogeneity of the ASR (as received), and the other is not knowing what constituents to be extracted from the ASR. The ability of the thermochemical process to transform waste into beneficial products is well known. The objective of this work is based on a techno-economic evaluation of the recovery of energy and high-value metals from Automotive Shredder Residue. The equipment sizing and fabrication cost of each piece used in this process are calculated based on laboratory experiments. An integrated techno-economic study for processing heterogeneous waste ASR has not been studied in the literature previously. The economic evaluation was carried out assuming a plant life of 25 years. In addition, the plant's revenue was generated by the obtained products, and the payback period for energy and metal recovery was found to be 3 years respectively. The capital cost and operating cost for the ASR recycling plant with a combined approach of recovering energy and metals have been estimated from grass root stage. The outcome of this study confirms that ASR recycling has potential value for secondary resources and the process is economically viable. The resource recovery from ASR is an environmentally friendly technology where the maximum utilization rate is raised, along with energy saving and environmental protection by reduction of ASR waste in landfill.