Abstract
The metal organic deposition (MOD) process of YBa 2Cu 3O 7− X (YBCO) using metal trifluoroacetate (TFA) precursors is considered to be a strong candidate as a low cost fabrication process in coated conductors since the TFA-MOD process is a non vacuum process and can provide high J c films. In order to develop long tape conductors using this process, the influence of the gas flow direction in the heat treatment was investigated. The J c value decreases toward to leeward side in the case of the parallel gas flow condition. On the other hand, in the case of the perpendicular gas flow condition. The J c value reveals uniformity in all over the tape and the high J c level is maintained. In the case of long tape production, it was found that the perpendicular gas flow to the tape length is effective to fabricate the uniform films. It could minimize the influence of consumption of H 2O and generation of HF gas in the up-stream area to the leeward region. The J c and I c properties and these distribution of the YBCO tape fabricated by this method on CeO 2/IBAD-Gd 2Zr 2O 7/Hastelloy is presented. Furthermore, a large scale equipment for the continues long tape process was developed based on the above findings. Consequently we have fabricated a 1 m long Y123 tape conductor by a reel to reel system. Even in the first trial, the uniform reaction for the entire length was recognized.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
