Abstract
A simple processing route for manufacturing highly porous, silica-bonded SiC ceramics with spherical pores has been developed. The strategy adopted for making porous silica-bonded SiC ceramics entails the following steps: (i) fabricating a formed body through a combination of SiC and polymer microbeads (employed as sacrificial templates) and (ii) sintering the formed body in air. SiC particles are bonded to each other by oxidation-derived SiO2 glass. By controlling the microbead content and the sintering temperature, it was possible to adjust the porosity such that it ranged from 19 to 77%. The flexural and compressive strengths of the porous silica-bonded SiC ceramics with ≈40% porosity were ≈65 MPa and ≈200 MPa, respectively. The superior strengths were attributed to the homogeneous distribution of small (≤30 μm), spherical pores with dense struts in the porous silica-bonded SiC ceramics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
