Abstract
Different thermoplastic starch (TPS) films were prepared with or without the addition of microcrystalline cellulose (MCC) obtained via the melt-extrusion method, and then the hot-press method was used to produce environmentally friendly TPS-based film/paper composites to replace petroleum-based materials. The paper-plastic composites exhibited good interfacial adhesion from the scannign elctron microscopy images. It was seen that 5wt.% MCC was added to reinforce the mechanical properties of TPS films, such that it also improved the barrier properties of MCC@TPS/paper composites and extended the path of water vapor through TPS films, which decreased the water vapor transmission rate of MCC@TPS/paper composites. TPS/paper composites and MCC@TPS/paper composites have better physical properties (i.e. smoothness, flexibility and folding resistance) than only paper. In particular, it was found that the water contact angle of MCC@TPS/paper composites and TPS/paper composites were higher than single-layer paper. Furthermore, MCC reinforced paper-plastic composites demonstrated good barrier properties which can meet the requirement of the need for lower water sensitive materials in the food packaging industry. Thermoplastic corn starch-based film/paper composites have good application properties as a potential source of bioplastic materials. © 2021 Society of Chemical Industry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
