Abstract
Abstract This paper presents the results of investigations carried out on processing and characterization of CrB2-based novel composites. Niobium metal powder was used as additive to form new composites. Hardness and fracture toughness of chromium boride increased by addition of niobium. CrB2 composites were prepared by addition of 2.5, 10 and 20 wt.% Nb. Density of higher than 95% ρ th was achieved in all the samples. Hot pressed samples were analyzed to contain reaction products of NbB2, Cr2B3 and Cr3B4 phases along with CrB2. Hardness of CrB2 composite was increased from 18.46 GPa to 21.89 GPa by increasing the Nb content from 2.5 to 10 wt.%. Fracture toughness of composites prepared by addition of 2.5 and 10% was measured as 3.11 and 3.38 MPa.m1/2 respectively. Addition of 20% Nb resulted in increased fracture toughness of 4.32 MPa.m1/2 .
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.