Year-end Sale % OFF 
Abstract
This study investigates the effect of preheat temperature, blank holder force and feed rate on the formability of polypropylene based Fibre-Metal Laminates. Finite element method combined with Design of Experiments was used to determine the influence of the forming process parameters. The design of experiments was used to identify the relative influence of each process parameter considered in this study. A reduced set of coupled structural-thermal simulations using Ls-Dyna were carried out using a L9 orthogonal array. Simulations were carried out on the forming of domes. It was found that the blank holder force has the greatest influence to increase the minor/major ratios followed by feed rate and pre heat temperature. A more thorough investigation of preheat temperature illustrated an optimum preheat temperature at 130 °C.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
