Abstract
Biogas plays a worthwhile role as a renewable, storable energy source. Anaerobic digestion (AD) is the core process in biogas production. The two most common process upsets that occur during this biotechnological process in practice are over-acidification and foam formation. Several research projects have been carried out so far to identify the causes of these upsets and to develop early warning indicators. However, the relevant laboratory results have not yet been verified in practice. Accordingly, the aim of this work was to study the practical application of the published tools in the case of a full-scale biogas plant. A full-scale AD plant utilizing cattle manure and energy crops was sampled over a period of 12 weeks. During this time, over-acidification and foam formation occurred in the primary digester. The sum of acetate, propionate and butyrate (VFAS) and the ratios of VFAS to magnesium (VFAS/Mg), calcium (VFAS/Ca), and phosphorus (VFAS/P) were found to be good predictive tools to identify over-acidification for the given AD system. Their values increased by factors of 6 (VFAS/Mg and VFAS/Ca) and 13 (VFAS, VFAS/P) in the early over-acidification phase. In contrast, the VFA/TIC ratio, which is a common indicator in practice, increased only by a factor of 2 during this phase. An ammonium-nitrate-urea solution proved to be an effective agent for foam suppression when sugar beet was used as a substrate. Its application showed no negative effect on the daily electricity production and the achieved long-term foam elimination. Several parameters were verified to be able to serve as an early warning indicator of over-acidification, but not one was found to be able to serve as an early warning indicator of foam formation in AD. Further research is needed to identify parameters with predictive potential for indicating foaming in AD.
Highlights
Biogas plays a worthwhile role as a renewable, storable energy source
The biogas is transformed into energy in two combined heat and power (CHP) units that combust the biogas, which was produced in both digesters
ANU addition had no effect on either biogas production or the methane content in the biogas
Summary
Anaerobic digestion (AD) is the core process in biogas production. The two most common process upsets that occur during this biotechnological process in practice are over-acidification and foam formation. Anaerobic digestion (AD) is a commonly used process for the utilization of biogenic material for energy production. Knowledge of the microbial process for the anaerobic digestion has increased considerably in recent years. The most common upsets of the biogas process are over-acidification [1] as well as the formation of foam [2] and floating layers [3]. Over-acidification is an upset of the AD process characterized by a decline in digestate pH due to the. The formation of foam may occur as a consequence of high organic loading rates [8]. The use of some substrates such as grain [9], sugar beet [10,11,12], or yeast [2] can even in relatively small amounts lead to foam formation
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
