Process Study on the Preparation of Degradable Antifouling Paint Coatings by Solvent Method

Abstract

Marine anti-fouling coatings have been widely used as one of the effective methods to prevent marine fouling organisms from adhering to the surfaces of various marine facilities. The main types are self-polishing anti-fouling coatings and low surface energy anti-fouling coatings, and biomimetic antifouling paint. Due to the increasing awareness of environmental protection, the anti-fouling coatings harmful to the environment have been gradually banned, so the research and development of new anti-fouling coatings has become the primary direction of development.In this paper, polycaprolactone and PLA were used as resin base materials, capsaicin as bio-friendly anti-fouling agent, starch as polysaccharide additive, the experimental samples were prepared by adjusting the mixture ratio of these materials. The experiment of adding starch and unadded starch was carried out by using Magnetic stirrer and other experimental equipment to simulate the hanging board method on the sea and observed and recorded, the effect of Starch on the hydrolysis of anti-fouling coatings using single component or blends of biodegradable materials such as polycaprolactone, polylactic acid (PLA) as resin matrix was investigated.The results showed that starch could promote the hydrolysis of resin-based materials such as PCL, and the solubility of PCL and PLA in chloroform was obtained, a preparation method of antifouling coating for marine static culture equipment was obtained.