7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
https://doi.org/10.1016/j.ijhydene.2013.08.009
Copy DOIPublication Date: Sep 4, 2013 | |
Citations: 84 |
Tri-reforming, as a new approach for the treatment of CO2 in flue stack gases, has been studied in this work. To determine the optimum operating conditions for the production of syngas with target ratio and maximum CO2 conversion, the effects of temperature (400–1200 °C), CH4/Flue gas ratio (0.4–1.0) and pressure (1–5 atm), on the compositions of syngas were investigated. Also, the methanol production from syngas has been rigorously simulated. An optimum heat exchange network was obtained with the objective of minimizing both utility and capital costs, which were calculated by General Algebraic Modeling system (GAMS). Furthermore, an economic analysis was carried out to substantiate the potential profits based on the conceptual results from heat integration. Results showed that the tri-reforming process, when integrated with methanol synthesis, is an economical approach for the treatment and utilization of CO2 in flue gases.
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.