Abstract
The energetic efficiency for the supercritical gasification of biomass is studied for three cases: hydrogen and methane production, heat and electricity cogeneration. Experimental results from the gasification of glucose are used to represent the gasifier. The other unit operations are simulated using the software ProsimPlus through thermodynamic equilibrium calculations. Simulations are conducted at different pressure, temperature and initial biomass concentration. The energetic and exergetic yields are calculated, as well as the minimum heat requirement estimated from a pinch analysis. All the results are then exploited to determine optimal conditions for two systems: adiabatic and isothermal. The optimal temperature ranges from 584 to 626°C, whereas the optimal initial concentration ranges from 51 to 87gL−1. The system giving the best result in term of global energetic optimisation is methane production in isothermal conditions, followed by methane production in adiabatic conditions. The optimal energy efficiencies are 94% and 91% respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
