Abstract
The laser power interaction effects on the evolving properties of commercially pure titanium during Laser Metal Deposition were analyzed. The optimized processing parameters obtained for this research study were, spot size of 4mm, powder flow rate of 2g/min, gas flow rate of 2l/min, and the scanning speed set at 0.002m/s. A total of seven samples were fabricated by depositing titanium powder onto a Ti–6Al–4V base metal; using an Nd-Yag laser by varying the laser power from 400 to 1600W while keeping all the other parameters constant. The deposited samples were characterised through the evolving microstructure, microhardness, wear and the corrosion behaviour. The microstructural evaluation revealed that the ratio of dilution increased with an increase in the laser power. Furthermore, it was found that as the dilution increased, the wear resistance behaviour of the deposits decreased due to the increased foreign elements (Al and V) from the substrate which inhibited smooth fusion as the molten deposit cooled. Also, the microstructural evaluation showed that finer martensitic microstructures were obtained at lower laser power rating which was associated with inter-layer porosity and due to the low laser-material interaction. However, Widmanstätten structures were observed at higher laser power settings together with the presence of intra-layer porosity which is desirable for osteointegration. For biocompatibility, immersion tests in the Hank's solution were conducted for 14days. The atomic absorption spectroscopy analyses showed that no leaching happened during the immersion process for all the samples hence, confirming the desirable properties expected of biomedical implants. An overall overview on the effects of the laser power which has a significant effect on the evolving properties is essential in order to know how this process parameter can be controlled to attain certain properties of the material for specific and tailored functions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.