Process optimization and transfer of freeze-drying in nested vial systems

Abstract

Scale-up and transfer of freeze-drying processes is a crucial challenge in biopharma industry. With the success of small batch processing lines utilizing rack vial holding systems, further detailed knowledge about freeze-drying cycles and their scale-up for vials in a rack is required. Therefore, product temperature (TP) profiles as well as Kv values of vials nested in a Polyetheretherketon (PEEK) rack were compared to those of vials placed in a commonly used stainless steel tray. Additionally, both setups were challenged with varying fill volume and partially versus fully loaded rack. Additionally, a process developed for rack was compared to a tray freeze-drying cycle.Freeze-drying in vials placed in the rack is markedly faster for center vials and more homogeneous compared to vials in bulk tray setting, as indicated by TP and Kv values. Due to the more homogeneous drying the rack is more flexible regarding variation of the fill volume. The key point for the transfer of a freeze-drying cycle from rack to tray is to consider the higher sublimation rates in the rack by adapting chamber pressure or shelf temperature for the tray. Furthermore, transfer from one rack per shelf in a laboratory freeze-dryer to pilot scale with four racks per shelf was successful. Thus, understanding of the process in rack and tray setup was enhanced to ensure efficient scale-up and transfer of freeze-drying processes.