Abstract
<div class="section abstract"><div class="htmlview paragraph">This paper studied the process development of dissimilar clinch joints in cross-tension specimens of aluminum alloy 5052-H32 (AA5052-H32)/thermoplastic carbon fiber reinforced plastic (TP-CFRP) sheets. The AA5052-H32 and TP-CFRP sheets with a thickness of 1.6 mm were used. The important processing parameters for AA5052/TP-CFRP clinch joints, such as the punching load, heating mode, heating temperature, and die depth, were considered. The failure loads, failure modes, and metallographic micrographs of AA5052/TP-CFRP clinch joints were analyzed to determine an available processing parameter set for fatigue tests. Finally, the fatigue performance and failure mode of AA5052/TP-CFRP clinch joints were obtained.</div></div>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: SAE International Journal of Advances and Current Practices in Mobility
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
