Abstract
This study applies a Total Site Heat Integration approach in conjunction with a detailed process and utility model, to develop an innovative ultra-low energy milk powder plant design. The basis for the analysis is a state-of-the-art modern milk powder plant that requires 5265 MJ/tp of fuel and 210.5 kWh/tp (58.5 MJe/tp) of electricity. The model of the modern milk powder plant was validated against industrial data and changes to process and/or utility systems are targeted and implemented into the model to understand the impacts on thermal and electrical demands and emissions. Results show that seven significant changes are beneficial: (1) pre-concentration of milk to 30% using reverse osmosis, (2) a two-stage intermediate concentrate (30%) homogenisation to enable high solids (60%) spray drying, (3) an ultra-low energy Mechanical Vapour Recompression evaporator system, (4) spray dryer exhaust heat recovery, (5) condensing economiser for the boiler, (6) upgrade and integration of chiller condenser heat with hot water utility systems, and (7) recycling of air in the building ventilation system. These changes are estimated to reduce thermal energy use by 51.5%, electricity use by 19.0%, and emissions by 48.6% compared to a modern milk powder plant.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
