Abstract
The technology of local wastewater treatment of oil production is presented. It based on the consistent use of physico-chemical treatment methods and allows to remove organic matter, suspended solids from wastewater to the requirements of regulations and divert treated wastewater into the municipal sewerage system. Wastewater generated during the processing of soapstocks, in terms of pollutants exceeds the standards set for wastewater when discharged into urban drainage systems. Therefore, before removal to municipal treatment facilities, they must be treated locally using physico-chemical and biological methods. In the phase-dispersed state, such wastewater is a stable emulsion. The presence of phospholipids, which are stabilizers of emulsions, complicates the phase separation of wastewater components. In addition, wastewater contains suspended particles, colloidal and dissolved substances of organic and inorganic nature. It was found that the highest values of the effect of removal of organic matter by COD - 78% at the initial COD - 40000 mg / dm3, the effect of reducing the concentration of suspended solids - 72.5% at the initial 6300 mg / dm3 were obtained in the process of coagulation using Al2 (SO4)3 and subsequent flotation with air supply through porous materials. The technological scheme of local treatment of industrial wastewater is proposed. It includes the following main processes: averaging, aeration, alkalinization, coagulation, flotation, oxidation, filtration, adsorption. Experimental studies have shown the effectiveness of treatment of soapstocks in oil production using the proposed technology with bringing the quality of treated wastewater to current sanitary requirements, which allowed to recommend the technology of treatment of soapstocks for successful use in industrial enterprises of the oil industry.
Highlights
МЕТА І МЕТОДИМетою роботи було встановлення послідовності процесів попереднього фізико-хімічного очищення соапстоків та їх ефективності для одержання якості очищеної води у відповідності до норм скиду в міську каналізацію.
Дослідження фізико-хімічних процесів очищення стічних вод, проби яких були відібрані на підприємстві з переробки соапстоків, були проведені науковцями кафедри екобіотехнології та біоенергетики КПІ ім.
Для зменшення у виробничих стічних водах підприємства концентрації завислих та органічних речовин, забезпечення їх концентрації у відповідності до встановлених нормативів, коригування рН до 6,5...9, потрібно застосувати локальне очищення стічних вод.
Summary
Метою роботи було встановлення послідовності процесів попереднього фізико-хімічного очищення соапстоків та їх ефективності для одержання якості очищеної води у відповідності до норм скиду в міську каналізацію. Дослідження фізико-хімічних процесів очищення стічних вод, проби яких були відібрані на підприємстві з переробки соапстоків, були проведені науковцями кафедри екобіотехнології та біоенергетики КПІ ім. Для зменшення у виробничих стічних водах підприємства концентрації завислих та органічних речовин, забезпечення їх концентрації у відповідності до встановлених нормативів, коригування рН до 6,5...9, потрібно застосувати локальне очищення стічних вод. Для встановлення оптимальної дози коагулянту, реагенту-осаджувача та окисника та оптимальної величини рН процесів дослідження проводили на пробах стічних вод, відібраних на діючому підприємстві по переробці соапстоків. В пробах визначали показники завислих речовин і ХСК. І наступна флотація з подачею повітря через дрібнопористі аератори тривалістю 60-90 хв. І наприкінці очищення стічних вод було використано послідовне їх фільтрування через піщаний та адсорбційний (з дрібнозернистим активованим вугіллям) фільтри
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.