Abstract
PPP using Kalman filter typically takes half an hour to achieve high positioning precision, which is required for small movements detection. Many dataset gaps due to temporary GPS receiver signal loss challenge the feasibility of PPP in GPS applications for kinematic precise positioning. Additional convergence time is needed before PPP reaches the required precision again. In this study, Partial parameters were estimated by using the position and ZWD as prior constraint. The solved partial parameters were applied to initialize the Kalman filter for PPP instantaneous re-convergence. A set of bridge GPS data with logging gaps were used to validate the re-convergence performance of improved PPP. The results show that the displacements from position-constrained PPP with initialized variance are 0.14 m, 0.09 m and 0.05 m, which are much better than those from standard PPP. The precision of displacement from position- and ZWD-constrained PPP with initialized variance is slightly improved when compared with that from position-constrained PPP with initialized variance at all 3 surveying points. The bridge experiment verifies that the displacement time series of improved PPP instantaneously converges at the first epoch of all signal reacquired, in contrast, standard PPP deviates by meters. This finding suggests that improved PPP can successfully deal with the GPS data logging gaps for instantaneous convergence.
Highlights
Precise point positioning (PPP) has been developed for centimeter-level precision with only one receiver and is supported by International GNSS (Global Navigation SatelliteSystems) Service (IGS) products [1]
The displacement precision of standard PPP degrades after the data gap, which is due to signal loss
We developed an improved PPP instantaneous convergence algorithm for applications to bridge displacement monitoring
Summary
Precise point positioning (PPP) has been developed for centimeter-level precision with only one receiver and is supported by International GNSS Systems) Service (IGS) products [1]. This technology has been successfully applied in a number of applications, including orbit determination [2,3], precise navigation [4], and GPS meteorology [5]. Atmospheric effect could cause tens of meters delays, which further reduce the PPP positioning precision. Precise water vapor radiometer readings could be applied for improving the PPP precision [6]. The ionosphere-free combination based on dual frequency were generally applied for reducing the severe ionospheric delay. MultiGNSS is an optional approach for improving the performance of convergency [7]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.