Abstract
Direct writing techniques for the printing of colloidal multiwalled carbon nanotubes (CNTs) embedded in polydimethylsiloxane (PDMS) were developed herein to fabricate complex structures including woodpiles, tetragonal scaffolds, and gradient mesh structures. The multiwalled CNTs served as a conductive filler and thickening agent for the printing ink. A suitable rheological behavior was obtained by mixing the CNTs with PDMS dissolved in an isopropyl alcohol solvent. A 7 wt % CNT loading in the PDMS was optimum for printing gap-spanning features at a nozzle movingspeed of 20 mm/s. The printed structures, including a woodpile and gradient mesh structure, were capable of detecting changes in external mechanical pressure. Printed CNT/PDMS strips exhibit electrical actuation with good mechanical performance (strain of 8.9%) at a low actuation voltage (60 V). The performance characterization and application display demonstrated the possibility of developing custom complex CNT/PDMS structures for a broad range of applications, including soft robots and flexible electronic devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.